Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

55 MM Extruder For Ballpen Barrel

Extruder For Ballpen Barrel
Water Tank: 16ft long stainless steel for cooling the barrel, vacuum chamber of 7" x 12" for sizing of pen barrel fitted with 1HPV Vacuum Pump with brass sizer for size Accuracy storage tank for complete circulation of chilled water with inlet & outlet system is provided for cooling, three movable guide rollers provided for centering of the Ballpen Barrel.
 
Hallauf: Designed to pull the ball pen Barrel in smooth operation without any jerks thus giving complete accuracy on the diameter and inner diameter of Ball Pen Barrel without any variation in size. The Caterpiller unit is driven by 1HP AC motor with Gearbox and AC Drive Rubber belts are provided for firm gripping of Ball Pen Barrel Geared Motor as per new specification (Servo Motor Optional)
 
Servocutter: Cutting is provided with two-knife action to cut Ball Pen Barrel to is correct size. It can be used to set various different sizes of Ball Pen Barrel Length. It is driven by 0.5HP Servo Motor and drive with PLC Pannel to set the right size & with accuracy cutting of Ball Pen Barrel and match the line speed of the caterpiller. (Servo will be as a option)
Production: Depends on size of the product, Raw Material, Processing Operating Parameters.
Power Consumption:
Driven Load: 10Kw
Total heating load with die: 15Kw
Total power consumption for Extrusion plant: 25Kw
 
 
SGE 50MM Extruder for Refill Plant
 
50MM dia Screw with LD ratio 24:1
Water Cooling Provided to the barrel at the feeding section.
Extruder Gearbox will be of reputed make. Transmission will be done by V-Belts to give Standard Speed range of Material flow range from 10-100rpm or also can be changed by Pulley sizes as per requirement of Speed & Torque.
Die: Co-Extruder Die is made in EN 24 Material. Spider is made in stainless steel and the cup & punch hardened and the hard chrome plated.
 
Heater Control Panel:
Will be of digital 8 Temp. Controller to control heating temperature on Barrel & Die. Mica band Ceramic heaters for efficient heating. It will be indiually set as per the feeding zone & Melting zone. Each heater will be Controlled by PID Instrument.
 
 
65MM Recycling Extruder
Recycling Extruder Plant
Model O/P
(kg/hr)
Screw
Dia(mm)
L/D
Ratio
Main Motor
(KW)
Rotary Pelletizer Heating Load KW Total KW
          Rotor Width KW    
SGE 65 70-90 65 28:1 30 6" .75 24 54
SGE 75 120-150 75 28:1 37 6" 1.5 30 68.5
SGE 90 180-210 90 28:1 45 6" 1.5 40 86.5
  Hydraulic Screen Changer
Material which can be recycled are PP, HDPE, LDPE, PVC, PS/ABS
 

Maplan | Homogenizer Screws | Variable Clearance barrier screws | Farrel Corp | Westland Corp | Energy Transfer Screw
Spiral R Screw | Spirex Pulsar Line | T Melt screw | Barrier Screw | Ball Pen Barrel | Screw | Barrel | Accessories
Home | About Us | Products | Tungsten Carbide Coating | Suggestion (Tips) | Procedure | Services | Educational | Sitemap
 
Designed & Hosted by : MID |  Promoted by : GID